- The Handyscope HS3 is a powerful computer
controlled measuring instrument that consists of four measuring
instruments: a Multimeter, an Oscilloscope, a Spectrum analyzer and a
Transient recorder. An AWG
is also available. This new powerful and compact measuring instrument can
solve almost every measurement problem.
- The Handyscope HS3 features a user
selectable 12 bit, 14 bit or 16 bit resolution (14 bit effective, SNR 95
dB), 200 mV - 80 V full scale input range, 128 Ksamples record length per
channel and a sampling frequency up to 100 MHz on both channels (100 MHz
only in 8 bit resolution).
- The integrated
AWG operates fully
independent from the measuring system of the Handyscope HS3. It has
a 50 MHz sampling clock, a 1024 / 128K samples deep waveform memory, a 14
bit output resolution and a ± 12 Volt output range. The
AWG allows you to
generate test signals for your measurements in any shape you like. Several
standard signal shapes are available and it is possible to regenerate
previous measured signals.
- Connected to the fast USB 2.0 (High Speed, 480
Mbit/s), the Handyscope HS3 doesn't require an external power
supply, therefore the Handyscope HS3 easily complies to "Plug in
and measure".
- The universal software that is delivered with the
Handyscope HS3 turns your PC into a storage oscilloscope, a
spectrum analyzer, a voltmeter and a transient recorder. An intelligent
auto setup allows the inexperienced user to perform measurements
immediately. The software allows you to save instrument settings on disk.
Later these setting files can be recalled, reducing the setup time of your
instrument to an absolute minimum.
|
